Following in the footsteps of the Omnibus F3, the Omnibus F4 V3 may be the standard by which all other flight controllers are measured.
Boasting an F4 processor, on-board Betaflight OSD, MicroSD Black Box, 5v3a sbec, video filter, you’ll be tuning pids with your transmitter and
tearing it up at the track in no time! With leaps and bounds in programming, it is now possible to connect your Smartaudio capable VTX such as
the TBS Unify Pro 5G8 HV or TBS Unify Pro 5G8 HV – Race Edition to the J10 header using our Omnibus smartaudio connector and make VTX
changes on the fly through the betaflight OSD.
The Omnibus flight controller got it’s start as a community project of sorts and is the result is the accumulation of input from the RCgroups forum
community. That being said, it should be no surprise that they have every feature the FPV community is looking for, from a class-leading F4 MCU,
to SmartAudio v2 support, it feels like every option that could be added withOUT compromising the omnibus FC’s longevity, has been added.
Item name: Omnibus F4 V3 Flight Controller
Mount holes: 30.5x30.5mmFeatures:
-STM32 F405 MCU
-Drag and Drop OSD configured via Betaflight Configurator
-Smartaudio v2 support – Tune your PID’s and configure the omnibus fc from your Transmitter
-MPU6000 6 axis SPI Gyro & Accelerometer
-SBUS/PPM AND Spketrum DSMX Ports
-MicroSD card blackbox
-On-board Video Filter(only can supply 5V to VTX and Camera)
-SmartAudio V2 via tx6 on J10
-4×3 pin ESC pin layout
-IR pins for lap timing transponder
Firmware is betaflight_3.1.7_OMNIBUSF4SD